9
Clean the food and cut it into pieces small sufficiently to
pass through the feeding chute, and place them onto the
hopper.
•
Any hard core, seed, skin or shell shall be removed in
advance.
10
•
Froward:start to work
•
Off: power-off,stop the work
•
Reverse: rotate in reverse direction to solve food stuck
problem
11
Load the food material in through the inlet and push them in
with propelling rod.
•
Proper amount of force shall be used to push the food
material in, not excessive but sufficient to have it cut off
exactly.
(Do not put your finger or any other object into the inlet!
If the residue/juice container is full, disconnect the power
supply and clear it up before restart.
）
How to disassemble
1.
Before cleaning this product, be sure to shut down the switch to disconnect the power
supply.
2.
Clean this product after using it.
3.
The main unit cannot be washed with water, and must be cleaned with twisted wet cloth
instead.
4.
Before storing it, make sure this product is clean and dry.
5.
Disassemble this product to wash the components by following the steps below:
1
First lift up the push rod and hopper
2
Lift up the locking ring, pull out the feeding
chute easily
