background image

3

Introduction

Thank you very much for purchasing your LED TV. It serves as a normal colour 
TV and a PC monitor. To enjoy your set fully from the very beginning, read this 
manual carefully and keep it handy for future reference.

INSTALLATION

1.  Locate the TV in the room where direct light does not strike the screen. Total darkness 

or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is 

recommended for comfortable viewing.

2.  Allow enough space between the TV and the wall to permit ventilation.
3.  Avoid excessively warm locations to prevent possible damage to the TV or premature 

component failure.

4.  This TV can be connected to AC 100-240V~ 50/60Hz.
5.  Do not install the TV in a location near heat sources such as radiators,  air ducts, direct 

sunlight, or in closed compartments and closed areas. Do  not  cover  the ventilation 

openings when using the TV.

6.  The indicator light will last for about 30 seconds after the power has been tumed off. 

Wait until the indicator light goes out before repowering the TV.

SAFETY

1.  DO NOT expose the television to extremely high temperatures (below 5° C and above 

35° C) or extreme humidity (less than 10% and more than 75%).

2.  DO NOT expose the television to direct sunlight.
3.  Prevent the television from coming into contact with liquids.
4.  Make sure that no objects get into the television and do not place vases of water on 

the television.

5.  Unplug the power cord and remove the antenna cable during a lightning storm 

(especially during lightning).

6.  Do not walk on the cable and ensure that the cable is fully unrolled.
7. 

Do not overload outlets or extension cords, as this may result in the risk of fire or 

electric shock.

8.  Use a soft, dry cloth (without volatile substances) to clean the television.
9.  Do not attempt to repair the television yourself if it is defective. Contact us by sending 

an email to [email protected].

Summary of Contents for 16M4

































Reviews: