2
Usage Preparation
1. Installation
- Let the space between rear side of the
cabinet to the wall be at least 30 cm.
- Should not install the cabinet near any
equipment that can reject such as
microwave oven, burner, or any other
refrigerator.
- Should install the cabinet in shaded area
(not exposed to the sunlight or rain)
- Should install the cabinet in good ventilation
area.
2. Electricity
- Connect the plug of the cabinet to the
same standard electrical socket.
- Should prepare single set of socket for each
cabinet and avoid joining the socket with
other electrical equipment.
- At least 1.5 square mm. Diameter is
recommended for the electrical wire
supplying to the socket terminal.
- Prepare 15 Ampere fuse for each cabinet.
- For 220 volt Electricity System, Ensure 220
Volt ± 10% (198-242 Volt) electricity is supplied.
For 110 Volt Electricity System, Ensure 110 Volt
± 10% (99-121 volt) electricity is supplied.
3. Start Run
The cabinet should be operated about 2
hours in advance of containing the eutectic
packs.
USER
MANUAL
PF-10,PF-12,PF-20,PF-22
