HK Audio DSM 2060, Manual

Page: 10 / 24

DSM 2060 Manual 1.0
10 Technical Specification
General
Inputs 2
Input Impedance > 10 kOhm Electronically balanced
Maximum Input level +20 dBu
Outputs 6
Output Impedance <100 Ohm, ground balanced
Maximum Output Level +22 dBu into 600 ohm load
Sample Rate 96 kHz
Bit Depth 24 bit
Frequency Response 10 Hz to 40 kHz, +/- 3 dB (filters disabled)
20 Hz to 20 kHz, +/- 0.5 dB (filters disabled)
THD <0.01%, (+10 dBu, 20 Hz to 20 kHz, 30 kHz bandwidth)
Dynamic Range >112 dB (A weighted, 22kHz bandwidth)
Serial Comms Data 38.4 kbaud, format: 8 data, 1 stop, no parity
Processing
Gain +20 dB to -80 dB and mute, 0.2 dB steps
Output Ch. Source Input A, Input B and Sum A+B
HP filter frequency Off, 10 Hz to 25.4 kHz, 1/36 octave steps
LP filter frequency 10 Hz to 25.4 kHz and off, 1/36 octave steps
LP / HP filter type 12, 18 & 24 dB/octave Bessel and Butterworth
12, 24 and 48 dB/octave Linkwitz Riley
4th or 8th order Hardman
Delay Input 400 ms, output 80 ms
Limiter High performance limiter, adjustable threshold
in 0.2 dB steps, automatic time constants
EQ frequency 10 Hz to 25 kHz, 1/36 octave steps
EQ gain +15 dB to -15 dB, 0.2 dB steps
EQ width 5.0 to 0.1 octaves bandwidth, 1/36 octave steps
Connectors
Audio inputs 3 pin female XLR
Audio outputs 3 pin male XLR
Serial comms Sub D
Network comms Future option
Mains 3 pin IEC
Mains Power Universal switch-mode PSU, 85 v to 250 v AC, 50 / 60 Hz
Consumption < 25 watts
Dimensions. 44 mm (H), 482 mm (W), 254 mm (D)
Weight 2.7 Kgs net
EC Declaration
of Conformity
We
Linea Research Limited
registered in
England, company No. 4742566
registered at
South Lodge House
Ickleton
Near Saffron Walden
CB10 1SH, England
Certify and declare under our
responsibility that the following product
DSM 2060 Digital Loudspeaker Proces-
sor
conforms with the following harmonized
European standards
• EN55103-1 Electromagnetic emissions
in environments E1, E2, E3, E4
• EN55103-2 Electromagnetic immunity
in environments E1, E2, E3, E4
• EN60065 Electrical product safety
and therefore complies with the
essential requirements and provisions
of EU directives
• 89/336/EEC Electromagnetic Compati-
bility directive, as amended
• 73/23/EEC Low Voltage Equipment di-
rective, amended by 93/68/EEC
MS D-1390a 02/06