SMART HJC 10A
18
How to operate SMART HJC 10A
1. Multifunction button
① One short click : ▶ (while power is off) Power on
▶ (while power is on) Photo is taken
② Two short clicks : Video recording on/off
③ Long click : ▶ 3–5 sec : Power off
▶ 10 sec or longer : Reset to factory settings
2. LED
① Camera RED LED (on the camera) :
▶ Off : Battery level above 15%
▶ On : Battery level 5–15%
▶ Blinking : Battery level below 5% (GPS, Wi-Fi power off)
② Battery RED LED (on the battery holder) : ▶ Off : Charging co
mplete
▶ On : Charging
③ WHITE LED : ▶ Upon power ON / OFF, all the LED will turn on in
sequence,
and then turned off.
▶ The LED can be set in the app settin
gs menu.
④ BLUE LED : The LED will turn on when the product is on.
3. Product boot confirmation
① After pressing the power button, a voice saying “hello” will
be heard, and the
white LED will turn on in a sequence.
②
Then, the LED will turn off, and a sound effect will be heard, indicating that the
product functions can be used normally.
4. Firmware upgrade (You can download the firmware from
① Copy the latest firmware to the 10A SD card. Insert the SD ca
rd into the 10A,
and turn it on.
②
A voice saying “firmware upgrade will start” will be heard, and the upgrade will
proceed automatically.
③
A voice saying ”firmware upgrade is completed” will be heard, and the system
will reboot automatically.
④
The system may reboot two or more times, which is normal. After rebooting,
the product can be used normally.
