ENGLISH
88
Heat Operation
(1) Unit start
Link with electronic power.
Press ON/OFF on the remote controller, unit starts.
The liquid crystal will display the working state of last time (Except Timer, Sleep,
Power/Soft and Health airflow).
2) Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Then
(3) Select temp.setting
Press TEMP. button
g
Every time the button is pressed, temp.setting increase 1ºC,if kept depressed,
it will increase rapidly
h
Every time the button is pressed, temp.setting increase 1ºC,if kept depressed,
it will decrease rapidly
Select a desired temperature.
(4) Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Air conditioner is running under displayed fan speed
IN HEAT mode, warm air will blow out after a short period
of the time due to cold-draft prevention function.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
Remote controller
OPERATION
Select HEAT operation
06Manual 10Hiyasu Eng 19/4/06 13:11 Página 88
