4
UNPACKING AND PLACEMENT
Before installing, verify that the electrical service agrees with the specifications on
the oven rating plate, located on the inside of the top front cover. If the supply and
equipment requirements do not agree, do not proceed with installation. Contact
your HIX customer service representative immediately.
UNPACKING
This oven was inspected before leaving the factory. The transportation company
assumes full responsibility for safe delivery upon acceptance of the shipment.
Immediately after unpacking the oven, check for possible shipping damage. If this
oven is found to be damaged, save the packaging material and contact the carrier
within 15 days of delivery.
Do not use the door or its handle to lift the oven.
PLACEMENT
The placement of the oven needs to be on a stable level surface sufficient to support
the weight of the oven and must allow adequate clearances for servicing and proper
operation Installations on supports restricting air circulation around the oven is not
advisable and may void the warranty. A minimum of three inches of clearance on
all sides and top as well as clearance from any combustible surfaces is required.
3”
3”
3”
3”