Hiwin HM-S, Assembly Instructions Manual

Page: 31 / 100

Assembly and connection
31
Assembly Instructions
Linear Axes HM-S and HT-S
HMS_HTS-01-0-EN-1905-MA
Fig. 6.13 Permissible axial operating force in tension direction per slot nut (F
A
_perm.)
F
A_perm.
L
NX
L
NY
L
NX
L
NY
L
NX
L
NY2
L
NY1
Size Minimum
number
of T nuts
L
NY
/L
NY1
[mm]
L
NY2
[mm]
Recommended
distance L
NX
[mm]
Thread
size
Screw tightening
torque
[Nm]
Clamping
force per T
nut [N]
F
A_perm.
1)
[N]
Art. no.
T nuts
(10 pcs)
HT100S 8 80 — 500 M5 4.5 5,400 500 20-000529
HT150S 8 120 — 600 M6 10.1 10,200 1,750 20-000531
HT200S 12 160 — 800 M8 24.6 18,600 5,000 20-000534
HT250S 16 210 130 1,000 M8 24.6 18,600 5,000 20-000534
1) Permissible axial operating force in tension direction per T nut
Table 6.2 Minimum number of T nuts for securing the axis, and recommended spacing of mounting points on long
axes – linear tables HT-S
Fig. 6.14 Securing with T nuts – HT100S, HT150S
Fig. 6.15 Securing with T nuts – HT200S
Fig. 6.16 Securing with T nuts – HT250S