22
Transport and installation
Assembly Instructions
Linear Tables HT-L
HTL-01-0-EN-1905-MA
5.3.2 Safety equipment to be provided by the operator
Possible safety equipment/measures:
|
Personal protective equipment in accordance with UVV (German accident prevention regulations)
|
Zero-contact protective equipment
|
Mechanical protective equipment
5.4 Storage
X
Store the linear tables in their transport packaging.
X
Alternatively: Use packaging that secures the linear tables against slipping, damage, and vibrations.
X
Store the linear tables in dry, frost free rooms only
X
Clean and protect used linear tables before storage
X
Remove packaging.
X
To transport the linear table, hoist it at the points designated A and B (see Fig. 5.1). The points A and B should be a
quarter of the axis’ overall length from each of its ends.
X
Do not hoist the linear table by its attachments. During transport, provide additional support for heavy attachments
such as the drive.
X
Dispose of packaging in an environmentally friendly way.
The linear tables HT-L may only be installed and operated indoors.
NOTE
Fig. 5.1
Supporting points A and B for hoisting and transporting
5.5 Unpacking and installing
Warning! Health and environmental hazards!
Contact with lubricants may cause irritation, poisoning, allergic reactions, and damage to the environment.
X
Use only suitable, non-hazardous agents. Note the manufacturer’s safety data sheets!
X
Ensure proper disposal!
ATTENTION!
Supporting point A
Supporting point B
