HIWATT Custom 50 SA112 Combo, Owner'S Manual

Page: 6 / 17

I. Do NOT switch the amplifier on without the
loudspeaker(s) connected.
➲
Note: This equipment has been tested and found to
comply with the requirements of the EMC Directive
(Environments E1, E2 and E3 EN 55103-1/2) and the Low
Voltage directive in the E.U.
➲
CAUTION: Any changes or modifications not expressly
approved by the party responsible for compliance may
void the users authority to operate the equipment.
➲
Note: It is recommended that all audio cables, with the
exception of the speaker lead, used to connect to the
amplifier are of a high quality screened type. These should
not exceed 10 meters in length.
Always use a non-screened speaker lead when connecting
a speaker cabinet to this amplifier.
➲
WARNING: Always ensure free movement of air around
the amplifier!