2. Rear shelf:
It can be placed on the platform under the rear window. (if there is flannelette on
the rear shelf, it can be placed on it directly. If there is no flannelette, it is necessary to
place the equipment on the anti-skid pad).
3. Front driver's seat extension bar
It is installed on the driver's seat extension rod through a strap.
4. Middle carrying case
It can be placed near the hand carrier between the front main frame and the copilot.
5. Rear seat middle bulge
Suitable for vehicles with cigarette lighter in the rear
Use operation
1. Equipment operation
(1) Automatic mode
Turn the power switch to "on" and insert the cigarette lighter to turn on the
automatic use state. When the car is started, it will automatically turn on the
purification function of the equipment, and when the car is turned off, it will turn off the
purification function automatically (after the flameout of some models, the cigarette
lighter will not be powered off, so the equipment can also turn off the purification
automatically after a period of judgment).The air volume of the equipment is
automatically adjusted with the pollutant concentration.
After the device is turned on, it defaults to smart mode, and the corresponding
display on the mobile terminal is automatic mode. At the same time, the air quality
sensor will collect the air quality data. After the self-inspection, the pollution index in
the current environment will be determined according to the test results. The light of the
equipment will change autonomously according to the current pollution level (green is
excellent, yellow is average, red is bad). In this mode, the wind speed will be adjusted
according to the air quality, and the excellent air is low speed, otherwise it is high
speed.
Note: the real value of the monitoring can be directly viewed after connecting
through the mobile phone.
(2) Manual mode
Turn the power switch to "on", turn on the device automatically, touch the switch
for about 3 seconds, and start / stop the device purification. During the operation, tap
for about 1 second to switch the operation speed (high-speed and low-speed switching).
