HC52 Series
© 2019 hivolt.de - Subject to change without notice, errors expected
HC52_E 08/2019 Page 6 of 7
hivolt.de
GmbH & Co. KG
Oehleckerring
40
∙
D-22419
Hamburg
∙
Germany
∙
+49 40 537122-0
∙
+49 40 537122-99
∙
∙
www.hivolt.de
CABLE ASSEMBLY INSTRUCTIONS HC52P-HTV30S
Step 1: strip as shown.
Make sure not to scratch the isolation!
Step 2: slide ferrule "C" over cable.
Step 3: put pin "B" on center conductor and solder in "Y".
Step 4: loosen braiding and slide connector "A" in place.
Step 5: slide ferrule "C" towards the connector "A" and
crimp.
Use 5.9mm/0.232inch hex crimp die insert
HC-CR-DIE-B
.
All dimensions are in mm [inch]; drawings not to scale
