3
hivolt.de
GmbH & Co. KG
Oehleckerring 40
y
D-22419 Hamburg
y
+49 40 53 71 22 80
y
+49 40 53 71 22 99
y
y
http://www.hivolt.de
1
Warnings
Attention! This device produces dangerous voltage above 500V.
The device should be operated only by skilled personnel, in accordance with the local
regulations and the instructions given in this manual.
Before switching on the unit, the experiment set-up should be checked out, and
safety should be assured. High voltage areas have to be sealed off and secured.
In case of suspected damage or malfunction, the device should immediately be put
out of service, and it should be secured against unintentional or accidental
operation.
To provide protection for personnel in case of unit failure, the safety ground must
always be connected! Local regulations about grounding should be taken into
account.
High voltages may still exist even after the switch-off of the device due to capacitive
charge! Capacitances connected to the outputs of the device can possibly remain
charged to dangerous voltages, even after switching off the device
Before removing any covers or modules, switch off the mains switch and disconnect
the unit from the mains!
Fuses have to be replaced by types as rated on the nameplate on the rear of the
unit.
Personal safety must be given the highest priority !
