3
hivolt.de
GmbH & Co. KG
Oehleckerring
40
∙
D-22419
Hamburg
∙
Germany
∙
+49 40 537122-0
∙
+49 40 537122-99
∙
∙
www.hivolt.de
1
Warnings
Caution! This device produces dangerous voltage above 3000V.
Due to capacitive charging,
dangerous voltages
can still be present in the set-up even after the
amplifier has been switched off!
Please respect the following rules before every activation of the high voltage amplifier:
The device should be operated only by skilled personnel, in accordance with the local regulations
and the instructions given in this manual.
The device may only be operated as a component of an overall structure that fully complies with
the regulations for working with high voltage systems.
Before switching the unit on, the experiment setup must be checked, and safety should be
assured. High voltage areas have to be blocked and secured.
In case of suspected damage or malfunction, the device should immediately be put out of service,
and it should be secured against unintentional or accidental operation.
The safety ground must always be connected! The grounding nut on the rear panel must be
connected to the grounding point of the setup and to protective earth. Local regulations about
grounding should be taken into account.
The output connectors must only be operated when the unit is switched off.
High voltages may still exist even after the switch-off of the device due to capacitive charge!
Capacitances connected to the outputs of the device can possibly remain charged to dangerous
voltages, even after switching off the device
Before removing any covers disconnect the unit from the power supply!
Before touching the output or working on the experimental setup, disconnect the unit from the
power supply!
No wires or similar objects may project into the device through the ventilation slots
Fuses have to be replaced by types as rated on the nameplate on the rear of the unit.
Personal safety must be given the highest priority!
