hival PCI 338, User Manual

Page: 36 / 41

36
This procedure is only for DOS Emulation, this will not effect the card in Windows
After installing, the Windows sound is repeating.
The card needs to be un/reinstalled into another slot.
Uninstall the card then shut down and put the card in a different slot.
Re-install the drivers once the card is re-detected. See: How to Un/Reinstall the Drivers
on this manual.
Not working in DOS Mode.
Make sure the SB Pro Emulation is working in the Device Manager.
Go to the Device Manager (Control Panel > System) open Sound,Video and Game
Controllers and double click on the Vortex SB Pro Emulation.
Make sure the Device Status says, “This device is working properly”.
(If the device has a red X or yellow dot see the corresponding solution on this manual.)
Then go to the Start button then Shut Down and click on Restart in DOS Mode and click
OK.
My Soundcard works, however I cannot record with my microphone. What can I
do to make it work? (Windows 95/98)
Follow these steps:
q
Click on the Start button > Programs > Accessories > Entertainment then
Volume Controls.
If you have Windows 95, click on Multimedia instead of Entertainment.
q
Click on Options then Properties.
q Under "Adjust volume for" click on Recording and check all the boxes at the
bottom and click on the OK button.
q Make sure Microphone has a check mark on "selected" and the volume
control is at least half way.
q
Click on Options then Properties and then check "Playback". Make sure the
box for Microphone is check and click on the OK button.
q
At this point, you should be able to record with the Sound recorder.
q
If you still can not record, Make sure you are connecting the Mic in the right
connector on the sound card and that you have a working Stereo Mic. (Stereo