HITWAY BK8, Quick Operation Manual, Page: 16 / 109

-13-
7. Install the Front Reflector
8. Install the Wheel Reflector
Using the Phillips screwdriver in the 16-in-1
tool, loosen the screws on the front reflector
bracket.
Snap the wheel reflector into the spoke
(Note that the spoke should be inserted into
the slot in the middle of the wheel reflector). Turn into the reflector clip and screw it about 90
degrees with the flat-blade screwdriver in the 16-in-1
tool to fix the tightening wheel reflector.
Put the front reflector bracket into the
corresponding position of the handlebar, and
tighten the screw with the Phillips screwdriver in
the 16-in-1 tool.