Hitron H4R15MX, User Instructions, Page: 9 / 56

I. Repeat steps D through G for additional observation cameras.
Caution:
Do not plug an observation camera and a standard security camera into the same
camera port on the rear of the observation monitor; i.e, an observation camera into
the RJ-11-E for CA1 and a BNC cabled standard security camera on the BNC input
for CA1.
NOTE:
Connecting a cable to the output BNC connector disconnects the termination for
that camera input signal, therefore an unused cable should be removed from the
BNC connector.
J. Plug the power cord for the monitor into a power outlet.
K. Turn on the MAIN POWER switch on the rear of the monitor and the POWER switch
on the front of the monitor.
L. The monitor displays a picture.
9