Version 1.0, 05/2013. Copyright 2012 Hitron Technologies
18
Version 1.0, 05/2013. Copyright 2013 Hitron Technologies
18
Hitron CDA-RES User’s Guide
The CDA-RES has a built-in DHCP server that, when active, assigns IP addresses to
computers on the LAN. When the DHCP server is active, you can get an IP address
automatically. The DHCP server is active by default.
If your computer is configured to get an IP address automatically, or if you are not
sure, try to log in to the CDA-RES (see
Login to the CDA-RES
on page
19
).
If the login screen displays, your computer is already configured correctly.
If the login screen does not display, either the CDA-RES’s DHCP server is not
active or your computer is not configured correctly. Follow the procedure in
Manual IP Address Setup
on page
18
and set your computer to get an IP
address automatically. Try to log in again. If you cannot log in, follow the manual
IP address setup procedure again, and set a specific IP address as shown. Try
to log in again.
NOTE:
If you still cannot see the login screen, your CDA-RES’s IP settings may have
been changed from their defaults. If you do not know the CDA-RES’s new
address, you should return it to its factory defaults. See
Resetting the CDA-
RES
on page
21
. Bear in mind that ALL user-configured settings are lost.
1.4.1
Manual IP Address Setup
By default, your CDA-RES’s local IP address is
192.168.100.1
. If your CDA-RES is
using the default IP address, you should set your computer’s IP address to be
between
192.168.100.2
and
192.168.100.254
.
NOTE:
If your CDA-RES DHCP server is active, set your computer to get an IP
address automatically in step
5
. The CDA-RES assigns an IP address to your
computer. The DHCP server is active by default.
Take the following steps to manually set up your computer’s IP address to connect to
the CDA-RES:
NOTE:
This example uses Windows XP; the procedure for your operating system
may be different.
1
Click
Start
, then click
Control Panel
.
2
In the window that displays, double-click
Network Connections
.
