HTM(HPV)-20N Series
HITROL CO., LTD.
15
Label
■ Label
The label stating the model, serial number, working temperature, working pressure,
and output is attached on the housing. The serial number is a unique
manufacturing number.
User Training
Under the aforementioned, do not exceed 80°C and 120°C, respectively, for the liquid
in the general and high-temperature containers when using the product. In addition,
make sure that the ambient temperature of housing is kept at -20 to +60°C.
(However, the C-Type is limited to a maximum temperature of 60°C for the liquid in
the container.)
Never open the cover of an ex-proof product while using it.
Ex-proof products are designed according to Article 34, Occupation Safety and Health
Acts and Clause 4, Article 58, Enforcement Regulation of the same.
Do not apply a non-ex-proof product in an ex-proof zone.
An ex-proof product can be used where the environment and the liquid inside
the container are of types 1 and 2.
Warranty
and Contact
Warranty and Service
This product is subject to a two-year shipment warranty. Unpaid service will be
provided for any damage found under normal operating conditions. If it does not refer
to product failure, payment will be required for the service charge.
You can request for A/S through our website or by contacting our headquarters.
Headquarters Factory Research Center
Address: Hitrol, 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do, Republic of
Korea (Palhakgol-gil 98)
HITROL CO., LTD. 141, Palhakgol-gil, Jori-eup, Paju-si, Gyeonggi-do,
Korea
TEL.: 031-950-9700 (Headquarters and A/S)
FAX : 031-950-9796
–9799 (Headquarters and A/S)
