HQ-Series
HITROL CO., LTD.
8
Installation
Cautions
If it is installed at the inlet where the measuring subj
ect flows into or where the subject is excessively shak
en, it may malfunction.
It is advisable to install it on a concret
e wall as shown in the picture.
Diameter “d” should be bigger than
those of the float and weight.
■ Use the same standard flange or screws.
■ Make sure washers are inserted between bolts and nuts to prevent loosening.
■ Make sure gaskets are inserted between flanges.
(Select the gaskets in consideration of the temperature of the content and the pressure of the
container.)
■ Make sure to install the product and the cover before supplying the power.
Make sure that it is not subject to any impact when moving it.
