background image

 

 

 

TIME MODE 

 
 
 
 
 
 
 
 
 
 
Use C to enter Time mode. 
* Mode prompt “TIME” is displayed first.  
- There are 2 time modes, Normal Time (indicated by T1) and Dual Time ( indicated by T2), and they count up 
  individually with the same second. 
- There are 3 displays for time. They are Time, Time with Barometer and Time with Weather.  
- There is an auto-calendar from 2000 to 2049. 
 

To switch between Normal Time and Dual Time 

Hold down B until the mode indicator (T1 or T2) stops flashing to switch between Normal Time mode and Dual  
Time mode. 
 

To switch among the 3 time displays 

Use A or E to switch among the 3 displays for time.  
* “TIME”, “BAROMETER” or “WEATHER” is displayed first. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
* Graph of sea level pressure is described in BAROMETER MODE.  

To set time 

1. Hold down D until the hour digits start to flash on the display, which indicates the setting screen.  

TIME/BAROMETER 

A or E 

TIME 

TIME/WEATHER 

A or E

 

A or

 

Temperature

 

Graph of 
sea level pressure 

Current sea level pressure

 

Weather

 

indicators

 

Time 

Day of the

 

week 

Day 

Unit indicator 
of temperature

 

Hold B 

 

Summary of Contents for 42.7003
















Reviews: