HiTi Digital Photo Printer 640PS, Service Manual

Page: 26 / 129

Confidential 26
Chapter 3: Disassembly
Safety Instructions for all HiTi products: Printers
•
Read these instructions carefully. Save these instructions for future reference.
•
Follow all warnings and instructions marked on the printer.
•
Unplug the printer from the wall outlet before disassembly.
•
Do not place the printer on an unstable cart, stand, or table. The printer may get
damaged by a fall.
•
Openings in the chassis and the bottom are provided for ventilation purposes and
to ensure reliable operation of the printer by protecting it form overheating: these
openings must not be blocked or covered.
•
Placing the printer on a bed, sofa, rug, or other similar, not firm surfaces may
block the openings. The printer should never be placed near or over a radiator or
heat register, proper ventilation and cooling must be provided at all times.
•
The printer should only be operated with the type of power indicated on the
marking label. If you are not sure of the type of power available in your area,
consult your dealer or local power company.
•
If an extension cord is used with this product, make sure that the total ampere
rating of the equipment plugged into the extension cord does not exceed the
extension cord ampere rating. Also, make sure that the total rating of all products
plugged into the wall outlet does not exceed the fuse rating.