Quick Start
Setting Your Printer
You may setup HiTi 640Amphi printer in the following steps.
1. Connect the power cord to the printer.
2. Connect the printer to your computer using the
USB cable.
3. Insert the ribbon cartridge into the printer; please see P.XX for more
information.
4. Place photo paper or plastic card into the cassette; please see P.XX
for more information.
5. Turn the printer power switch on. The green LED will blink for 5
seconds and then stay on. Before you turn on the power switch,
please make sure the printer driver software is installed in your
personal computer. Please see P.XX for more information about
driver installation.
6. The New Hardware Found message dialog will appear on the screen
of your computer. Windows will begin to install the printer driver.
