HiTi Digital 630PS, Service Manual, Page: 31 / 80

Ver. Ex.1.1
Confidential
2003/7/8
Step 3. Ribbon registration (Yellow)
Step 4. “Cam Gear” goes to “Print” position
Step 5. Print Yellow
Step 6. “Cam Gear” goes to “Load” position
Step 7. Ribbon registration (Magenta)
Step 8. Back paper
Step 9. “Cam Gear” goes to “Print” position
Step 10. Print Magenta
Step 11. “Cam Gear” goes to “Load” position
Step 12. Ribbon registration (Cyan)
Step 13. Back paper
Step 14. “Cam Gear” goes to “Print” position
Step 15. Print Cyan
Step 16. “Cam Gear” goes to “Load” position
Step 17. Ribbon registration (Overcoat)
Step 18. Back paper
Step 19. “Cam Gear” goes to “Print” position
Step 20. Print Overcoat
Step 21. Eject paper
Step 22. “Cam Gear” goes to “Load” position
Step 23. “Cam Gear” goes to “Initial” position
5.3 Temperature Control
1. If “Thermistor” detects the temperature is “less than 5 degree Centigrade” or
“more less 38 degree Centigrade”, there will be a message pop up to indicate
user that the temperature of current surrounding is not suitable to print.
Note: It still can print.
2. Firmware will decide to use different heating tables when “Thermistor” detects
the surrounding temperature is “less than 18 degree Centigrade”, “more than 30
degree Centigrade” or “between 18 degree Centigrade and 30 degree
Centigrade”.
3. Printer will do the warm up action (move Cam gear) if the surrounding
temperature is less than 5 degree Centigrade.