-Because the Spectra 75 Module is designed to be completely removed from the
transmitter prior to the channel change, there is no chance of broadcasting an
unwanted signal during the channel change procedure.
-Frequency range:
75.41 to 75.99 (CH 61~90)
-RF input power:
400mW
-Modulation:
2.8kHz +/- 200Hz
-Current Drain:
150mA +/-30mA
-Please prevent excessive moisture, fuel and dust from entering the module.
-Avoid excessive force when turning the channel dials.
-Prior to changing frequency, please check to make sure no one else in the
vicinity is operating on the channel you wish to change to. If your track uses a
frequency control system, please obtain the clip before making the actual
channel change.
Caution:
Although the dials are clearly marked 1
st
digit and 2
nd
digit to
correspond to the proper channel number, it is imperative that no confusion
occurs in dialing in the new channel number. Transposition of the channel
numbers such as 67 instead of 76 could result in interfering with another radio
already in operation. Always verify the channel before plugging the module back
into the radio. Additionally, there is a one second delay in the activation of the
RF signal at the instant the transmitter is turned on. As a safety measure you are
cautioned no to drive your vehicle until the control link has been established.
Frequency Safeguards
Specifications
Care and Operation
