HITEC SPECTRA 2.4, User Manual

Page: 2 / 6

AFHSS 2.4GHz Telemetric Transmitter
- All Hitec Module Type Transmitters and
Futaba 9C / 9Z Series Compatible
- Versatile Telemetric Data Port
(w/ Optional Sensors)
- Easy Link
- Size : 37.5 X 59 X 22.4
mm
Stock# : 28315
SPECTRA 2.4
Full Range AFHSS 2.4GHz 6ch Receiver
- Boosted Omni-Directional Antenna Applied
- Supplementary Power Connection (SPC)
- SmartScan Mode Selectable
- Size : 46.15 X 21.42 X 11.1
mm
- Weight : 15g
Stock# : 28410
OPTIMA 6
Full Range AFHSS 2.4GHz 7ch Receiver
- Boosted Omni-Directional Antenna Applied
- Supplementary Power Connection (SPC)
- SmartScan Mode Selectable
- Size : 57 x 21 x 11.4
mm
- Weight : 17g
Stock# : 28414
OPTIMA 7
Full Range AFHSS 2.4GHz 9ch Receiver
- Dual Boosted Omni-Directional Antenna Diversity
- Supplementary Power Connection (SPC)
- SmartScan Mode Selectable
- Size : 47.95 X 28.5 X 15.35
mm
- Weight : 22g
Stock# : 28425
OPTIMA 9
Frequency Table
1. INTRODUCTION
Thank you for your purchase of Hitec’s 2.4GHz Aurora-9 System, and we are glad to introduce our
complete set of A.F.H.S.S Telemetry 2.4GHz through long research and develop process.
This manual contains complete instruction of Optima 2.4 and Spectra X series receivers.
Please read it carefully and thoroughly for your safe and comfortable fly in the field
Flying Area : It is recommended flying only at approved area.
Please read and understand FCC rules and regulation to prevent from against any
law in your area. Also be careful not to threat other people at the time you are
flying an aircraft.
Avoid flying while it’s raining : The water could leak inside of transmitter or receiver to
get it malfunction. If it’s necessary then make sure your systems to be completely
water resistance.
To turn on or off the system : please keep the following sequence all the time.
Turn on the transmitter than the receiver and turn off the receiver and the transmitter.
Function Check : before the engine start or turn on the main power of the aircraft,
please turn on the system as explained above. Then make sure all the servos and
control surface is working properly. When any control surface is not moving properly,
never operate the aircraft until the problem solved.
Model Check : make sure that your radio is powered up for the proper aircraft.
Especially if you have multiple aircraft with one radio it is commonly ignored until it
becomes a habit.
Range Check : To see the transmitter is working properly, do the range checks every time
before the flight. Make sure to hold the aircraft before you test the range.
When you reach the maximum range of the radio, the aircraft starts jitter and jitter dead.
Proper range should be approximately 30 meter from the plane. Detailed method can be
found later in this manual. (Power-Down Mode)
2. WARNINGS
Following instructions are written for you and other’s safety sake,
please take your time and read it thoroughly.
This product is developed exclusively for the hobby aero vehicles;
do not operate it in any other applicants
Check
Check
Check
Check
Caution
Check Caution Warning
Tip Tip
Tip
2 3
Product Specification