- 5 -
The unique open-stick assembly
provides fully adjustable stick tension
"feel". Turning the tension adjustment
screw clockwise will soften ( decrease
the tension ) the feel of the control stick,
(fig 4).
CP-variable resistors improve
the neutral characteristics and
resolution of the servo positioning.
All of the molded parts are
fabricated from high-grade
polycarbonate that is unaffected by
temperature and humidity.
Turn with a Phillips
screwdriver
The spring becomes
stronger when the
screw is turned
counterclockwise
Fig 4
5. Operation & adjustment
A. Control stick length & tension & trim lever adjustments
The length of the nonslip control sticks can be adjusted to suit the requirements of the
operator. (fig-5)
The trim lever on each control stick is used to correct ( trim out ) flight
characteristics. After the initial test flight note the positions of the control surfaces that
required trim. Next center trim levers, turn off the receiver radio. Now adjust the control
devices of the surfaces that required trim so that the surfaces are in the same position before
the trim levers were re-centered. Turn on the receiver radio and recheck the control surface to
ensure that all the corrections were applied in the correct direction.
Adjusting knob
!
Unlock
!
Set to the desired length by
turning the knob, then lock.
Fig 5
