Hitec Luxembourg S.A. |
5, Rue de l’Église, L-1458 Luxembourg
www.hitec.lu | [email protected] | Tel.: (+352) 49 84 78 - 1 | Fax. (+352) 401303
File Name: HTCA_003-DADS-UserManual.docx
Document Type: End User Manual | Version date: 01/05/2010 | Last Printed: 15/02/2011
Page 43/81
Normalization
The following window will appear by choosing the Normalization menu. Refer to the section
Normalization Measurement to get more information about the principle of the Normalization
measurement, and some guidelines.
It gives a summary of the dates the last normalization measurements have been done for
each carbon-black reference type defined. Normalization measurements are always related
to a chamber.
Figure 11
– Normalisation Dates Table
Different functions are available:
Trend
Shows the
history
of the Normalization measurement for one group of
carbon-blacks. A list is displayed and a trend graph can be shown. This is
useful to supervise the
chamber quality
along time.
Gives the user the possibility to print out a summary of the latest
Normalization measurements and also current
status
of the Normalization,
for a carbon specific black group. It shows how the normalization is
calculated.
Provides more information on the Normalisation for a single carbon-black
type. The last
measurements
can be visualized, and new measurements
can be done.
Remark:
The names and target values of the different carbon-black reference listed up here
can be changed in the HITEC Config application, on the DADS /
