HITEC 2.4GHz
Hitec Customer Service
Help is available from the Hitec office through phone support and e-mail inquiries.
Our US office is generally open Monday thru Friday, 8:00AM to 4:30PM PST.
These hours and days may vary by season. Every attempt is made to answer every incoming service call.
Should you get voice mail, leave your name and number and a staff member will return your call.
Hitec Website
Make plans to visit the Hitec website, www.hitecrcd.com, on a regular basis. Not only is it full of specs and other inform
ation about the entire Hitec product line, our FAQ pages will eventually hold valuable information and program update
about the AXION Series receiver.
One of the benefits of the extensive R/C online community is the vast wealth of archived knowledge available.
Hitec sponsors forums on most of the popular R/C web sites where a Hitec staff member or representative tries to
answer all manner of product related questions.
Bringing together strangers with common interests is proving to be one of the greatest gifts of the internet. If past history
is any guide to the future, we are certain forums will be started about the Hitec 2.4 system and several are certain to
stand out as valuable archives of information
All Hitec products carry a two year from date of purchase warranty against manufactures defects.
Our trained and professional service representative will determine if the item will be repaired or replaced.
To provide all the necessary information we need to administrate your repair, visit our website at www.hitecrcd.com and
download the repair form, fill it out and send in your item for repair.
Operating Voltage:
Rechargeable four to six cell NiMH, NiCd, or LiPo batteries (4.8~7.4V). From the receiver battery
power or speed control (ESC) power. Select the suitable voltage depends on the servos capability.
Current Consumption:
30mA
Note
Servo manufacturer will specify maximum voltage of their servo model.
Please refer each servo’s specification.
Compatibility
The Tachyon Series receivers are compatible with transmitters using the Hitec Surface 2.4G AFHSS system
1. Function Button
Used for linking the receiver to a Transmitter, To select response.
2. LED Status Indicator
Indicates the set-up process codes and current status of Tachyon receivers..
See 2 page for more detail
3. Channel Output and Battery Input Ports
The ports for battery, servos and other accessories
Fail safe / Hold
The positions of the servos and other accessories can be set with a FAIL-SAFE point, if power to the receiver is Lost within
1 sec. See page 2 more detail
The On-Line Community
Warranty and Non-Warranty Service
1. The receiver antenna should not be placed near the engine, metal parts, or high current batteries.
2. The receiver Antenna should not get damaged. To prevent antenna damage, do not install the
antenna near the sharp edge or bend it more than 90 degree in angle.
3. Use a Velcro or think double sided tape to install to absolve the shock during the operation.
4. When LED indicator irregularly blinks, indicates unstable frequency environment, stop operating and
look for the possible cause of problems.
Warning
Axion Series Receiver Specifications & Features
Full Range AFHSS 2.4GHz Receivers
Receiver Model
Size
Weight
Stock Number
AXION 2
1.26 x 0.87 x 0.43in (32 x 22.3 x 11mm)
0.25oz (7.0g)
27724
AXION 4
1.26 x 0.87 x 0.43in (32 x 22.3 x 11mm)
0.25oz (7.0g)
27824
2&4
• Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions.
European CE notice to users and product statements
- Frequency Range : 2409.2 MHz ~ 2474.0 MHz
- Hereby, HITEC RCD INC, declares that our (RE type : PROTON 4e) is in compliance with RED 2014/53/EU.
The full text of the EU DoC is available at the following internet address:
www.multiplex-rc.de
• FRANCE Frequency Range : 2.4056GHz~ 2.4482GHz
FCC notice to users and product statements
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Instruction Manual
Version 2.0
