12
ATTACHING THE
PROPANE CYLINDER
CAUTION:
Use 16oz. cylinders that are marked “propane fuel” only. Prior to
installing the cylinder, check to make sure its fitting is not damaged
or bent. If the propane cylinder is damaged, DO NOT install it on your
HitchFire Grill.
DO NOT IGNITE THE BURNER WHILE CHECKING FOR LEAKS.
When installing the cylinder, be sure that it screws in securely in a smooth
and straight manner.
DO NOT CROSS THREAD.
Slide propane cylinder through cylinder hook, while holding carrying
handle closest to propane cylinder with one hand, push propane cylinder
into regulator and turn clockwise until tight.
WARNING: Do not use a wrench to tighten the connection. Using a
wrench could damage the regulator coupling and could cause a leak.
WARNING:
You should check for gas leaks every time you disconnect and reconnect a
gas fitting.
CHECK CONNECTIONS:
1. Regulator to propane cylinder connection.
2. Valve-to-regulator connections.
Check for gas leaks by wetting the connections with a soap and water
solution and watch for bubbles. If bubbles form or if a bubble grows, there
is a leak. Note: all connections should be rinsed with clean water after
checking for leaks.
WARNING:
If there is a leak at the connection, remove propane cylinder. Do not
operate grill. Use a different propane cylinder and recheck for leaks with
soap and water solution. If a leak persists after re-tightening the propane
cylinder, turn
OFF
the gas.
DO NOT OPERATE THE GRILL.
