1-10
StarBoard FX-77G
Ⅱ
English
Introduction
(2) Installing the Height Adjustment Stay
Install the Height Adjustment Stay with 28 screws as shown in figure below.
(3)
Board Installation
Install the board on the stand assembled in step (1). Install the board according to the
following procedure. Furthermore, this step should be performed by at least two
people. Numbers in the diagram correspond to numbers in the parts list on page 1-3.
CAUTION
Fasten the screws tightly.
The board might fall and cause injury or its impact might cause damage.
CAUTION
This work should be performed by at least two people.
The board might fall and cause injury or its impact might cause damage.
Fully tighten the triangle head screw.
The board might fall and cause injury or its impact might cause damage.
Screw
Height adjustment stay
