SAFETY
SA-29
Avoid High-Pressure Fluids
Fluids such as diesel fuel or hydraulic oil under pressure can
penetrate the skin or eyes causing serious injury, blindness
or death.
Avoid this hazard by relieving pressure before
disconnecting hydraulic or other lines.
Tighten all connections before applying pressure.
Search for leaks with a piece of cardboard; take care to
protect hands and body from high-pressure fluids. Wear a
face shield or goggles for eye protection.
If an accident occurs, see a doctor familiar with this
type of injury immediately. Any fluid injected into the
skin must be surgically removed within a few hours or
gangrene may result.
Prevent Fires
Check for Oil Leaks:
Fuel, hydraulic oil and lubricant leaks can lead to fires.
Check for oil leaks due to missing or loose clamps, kinked
hoses, lines or hoses that rub against each other, damage
to the oil-cooler, and loose oil-cooler flange bolts.
Tighten, repair or replace any missing, loose or damaged
clamps, lines, hoses, oil-cooler and oil-cooler flange bolts.
Do not bend or strike high-pressure lines.
Never install bent or damaged lines, pipes, or hoses.
Replace fuel hoses and hydraulic hoses periodically even
if there is no abnormality in their external appearance.
Check for Shorts:
Short circuits can cause fires.
Clean and tighten all electrical connections.
Check before each shift or after eight (8) to ten (10) hours
operation for loose, kinked, hardened or frayed electrical
cables and wires.
Check before each shift or after eight (8) to ten (10) hours
operation for missing or damaged terminal caps.
DO NOT OPERATE MACHINE if cable or wires are loose,
kinked, etc.
Never attempt to modify electric wirings.
SA-031
SA-292
SA-044
SA-019
WLBJE0-EN-00
Summary of Contents for ZX170W-5A
