ZW370 FS 00-10
00 General Information
Outline
Coolant
Coolant specification
The machine is originally filled with Long Life Coolant
(non-Amin type ethylene glycol) which need not be
replaced for the first two years or 3,000 hours.
Do not use Amin type Long Life Coolant in cooling sys-
tem. It may cause a corrosion against radiator or heater
core.
If standard antifreeze (not Long Life Coolant) is used for
the replacement, it should be replaced every six
months.
Recommended mixture of antifreeze
(S/N 9001~9150)
(S/N 9151~)
- Too much antifreeze in the coolant mixture may
cause engine overheating.
Keep 33% antifreeze mixture (same as the mixture
for a minimum ambient temperature of -15°C (5°F)) if
the engine overheats in a high ambient temperature.
- Do not use hard water or water with high levels of
calcium and magnesium ions as the coolant water.
Diesel Fuel
Specifications
Requirements for diesel fuel
Grade No. 1-D
Grade No. 2-D
Flash Point ºC.
min.
38
52
Water and Sediment % vol.
max.
0.05
0.05
Distillation Temperature ºC. 90% vol. recovered
max.
288
338
Kinematic Viscosity mm
2
/s at 40ºC
min.
1.3
1.9
max.
2.4
4.1
Ash % mass
max.
0.01
0.01
Sulfur % mass
max.
0.50
0.50
Cetane Number
min.
40
40
Carbon residue on 10% distillation residue % mass
max.
0.15
0.35
Expected minimum
ambient temperature
-35ºC
(-31ºF)
-30ºC
(-22ºF)
-25ºC
(-13ºF)
-20ºC
(-4ºF)
-15ºC
(5ºF)
Pure Water
(liter)
(gal)
54.0
(14.3)
59.8
(15.8)
65.5
(17.3)
71.3
(18.8)
77.0
(20.3)
Antifreeze
(liter)
(gal)
61.0
(16.1)
55.2
(14.6)
49.5
(13.1)
43.7
(11.6)
38.0
(10.1)
Mixture Ratio (%)
53
48
43
38
33
Expected minimum
ambient temperature
-35ºC
(-31ºF)
-30ºC
(-22ºF)
-25ºC
(-13ºF)
-20ºC
(-4ºF)
-15ºC
(5ºF)
Pure Water
(liter)
(gal)
47.0
(12.4)
52.0
(13.7)
57.0
(15.0)
62.0
(16.4)
67.0
(17.7)
Antifreeze
(liter)
(gal)
53.0
(14.0)
48.0
(12.7)
43.0
(11.4)
38.0
(10.0)
33.0
(8.7)
Mixture Ratio (%)
53
48
43
38
33
IMPORTANT
Do not mix different brands of antifreeze because
they each contain special additives.
Careless mixing often diminishes the effect of these
additives that causes the packing damage or water
leakage.