--- 9 ---
(6) Advanced case
The new case satisfies the following demands.
Compact and sturdy
Refined two-tone body design
Excellent accommodation
(Stored many accessories such as chuck adapter, stopper, long socket, various sockets and bits)
Convenient bit holder (Hitachi only)
(It is very convenient for holding prepared-hole drills and long bits.)
Convenient bit holder
Metal fitting
Stored items: 23
(7) Comfortable and well-balanced handle
When an impact driver is continuously operated, the housing tail may rub the base of the operator's thumb and
give pain to the operator. To cope with this problem, the Models WH 12DM2/WR 12DM2 are equipped with
the separate-type motor without case and the slim tail section with narrow housing tail (the previous Model
WH 12DM has the same construction).
More delicate speed control is required at the start of tightening screws. The Models WH 12DM2/WR 12DM2
have a grip whose circumference at the switch section is shorter than the competitors for ease of operation
(grip circumference at the switch section with respect to C: -14 mm P: -13 mm).
The grip of the Models WH 12DM2/WR 12DM2 is slip-resistant even if held by a sweaty hand and comfortably
fits thanks to the soft material and the embossed treatment (holding force: 30% greater than the previous
model).
Gives no pain to the
operator's thumb.
Thumb
Slim tail
Slip-resistant embossed grip
(30% greater holding force)
<Example of storing>
