Note:
The programming information has been stored in a
TIMER block.
7
Make sure that the cassette you have put in can be
recorded on.
8
Switch off with
STANDBY
m
.
The programmed recording will only function when the
video recorder is
switched off
with
STANDBY
m
.
Note:
If any of the TIMER blocks are in use, ’
k
’ will light up
on the video recorder display.
* While a programmed recording is being made, you cannot
operate your video recorder manually. If you want to cancel
the programmed recording, press
STANDBY
m
.
* If the video recorder is switched on a few minutes before
a programmed recording is supposed to begin, ’
SWITCH
TO STANDBY- TIMER RECORDING
’ will flash on the
TV screen.
* If you reach the end of the cassette during a recording,
the video recorder will automatically eject the cassette.
* If you forget to load a cassette, ’
NO CASSETTE
’ will
appear on the TV screen and ’
k
’ will flash on the video
recorder display.
* If you have put in a cassette which cannot be used for
recording, the video recorder will automatically eject it.
* If ’
ALL TIMERS OCCUPIED
’ appears on the TV screen
when you press
TIMER
, you have used up all the available
TIMER blocks. If you want to clear or check a TIMER block,
select it with
;
P+
or
P-
=
.
* Programme numbers ’
E1
’ and ’
E2
’ are for recordings from
other sources (through scart socket
AV1 EXT1
or
AV2 EXT2
).
Programming a recording
(without ’VIDEO Plus+’)
1
Switch on the TV set and select the programme number
for the video recorder.
2
Press
TIMER
on the remote control
twice
. The free
TIMER block will be highlighted.
3
Press
TIMER
. The information will appear on the
screen.
TIMER
VPS
DATE REP. PROG. START PDC
END
21 MO-FR
01
20:00
]
21:30
________________________________
STOREpOK
4
With
TIMER
,
P
or
Q
you can select ’
DATE
’ (date),
’
PROG.
’ (programme number), ’
START
’ (start time) and
’
END
’ (end time).
Enter or change your information with
;
P+
or
P-
=
, or
with the number buttons
0-9
.
Note:
Under ’
DATE
’, use the
SELECT
button to select daily
or weekly programming.
’
ONCE
’
: Recording once
’
MO-FR
’
: Recording from Monday to Friday.
’
WEEK.
’
: Recording every week on the same day.
* Under ’
START
’, use
SELECT
to switch ’VPS/PDC’ on or off.
If ’
]
’ appears in the display, ’VPS/PDC’ has been switched
on.
5
Confirm with
OK
when the information is correct.
Note:
The programming information has been stored in a
TIMER block.
6
Make sure that the cassette you have put in can be
recorded on.
7
Switch off with
STANDBY
m
The programmed recording will only function when the
video recorder is
switched off
with
STANDBY
m
.
19
