Special installation functions
You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
Automatic TV channel search
The video recorder will search for all TV channels.
Note:
If you want to start the automatic TV channel search
again, then follow the instructions below.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
MENU
on the remote control. ’
CLK
’ will appear in
the video recorder display.
3
In the display, select ’
AUTO
’ (Automatic TV channel
search) with
P-
=
or
;
P+
.
4
Press
OK
. The ’Automatic TV channel search’ starts.
5
When the TV channel search is complete, ’
OK
’ will
appear on the screen.
6
To end, press
MENU
.
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
Monitor function
You can switch backwards and forwards between TV picture
and video recorder picture with
VTR/TV
. But this only works
when you use a scart cable to connect the video recorder to
your TV set and if your TV set responds to this switch-over.
You can also use
VCR/TV
on the video recorder.
Sorting and clearing TV channels manually
You can assign any programme number to a TV channel that
you have stored and you can also delete unwanted TV
channels.
1
Switch on the TV set. If required, select the programme
number for the video recorder.
2
Press
MENU
on the remote control. ’
CLK
’ will appear in
the video recorder display.
3
In the display, select ’
ALLO
’ (Manual TV channel search)
with
P-
=
or
;
P+
.
4
Press
OK
.
CH21
5
With
P-
=
or
;
P+
, select TV channel to which you
want to give this the programme number, starting with
’P01’.
Note:
If you want to delete a TV channel, press
CLEAR (CL)
.
6
Confirm with
SELECT
.
7
Repeat steps
5
to
6
until you have given a programme
number to all TV channels.
8
Confirm with
OK
.
9
To end, press
MENU
.
7