background image

TECHNICAL SPECIFICATIONS 

 

Technical specifications 

Format: ------------------------------------------------------------------------------------------VHS 
Video Signal System: ---------------------------------------------NTSC color EIA standard 
Record/Playback System: ------------------------------------------------------------- Video: 4 head 

------------------------------------------ Audio: VHS Hi-Fi stereo record/playback system 

Tape Speed: ---------------------------------------------------------- 33.35 mm/sec (SP), 16.67 mm/sec (LP) (playback only), 

-------------------------------------------------------------------------------------------------------11.12 mm/sec (EP) 

RF Input: -----------------------------------------------------------------------------UHF/VHS 75 ohm 
Tuner:---------------------------------------------------------------------- USA: 181 channel tuning ability* (125 cable channels) 

-------------------------------------------------------------------------- Canada: 178 channel tuning ability* (122 cable channels) 

Type: ----------------------------------------------- Auto programming frequency synthesis 
Power Input:-------------------------------------------------------------------------------- AC 120V 60 Hz 
Power Consumption:----------------------------------------------------------------------------16W nominal 

-------------------------------------------------------------------------------------------------------- 2.0W (Standby mode) 

Cabinet Size:------------------------------------------------------------------------- 14-15/16" (W) x 3-11/16" (H) x 10-13/16" (D) 

------------------------------------------------------------------------------------------------ 38.0 cm (W) x 9.3 cm (H) x 27.5 cm (D) 

Weight: ---------------------------------------------------------------------------------------------- 7.7 lbs. (3.5 kg) 
Storage Temperature: -------------------------------------------------------------------------- -4°F to 131°F 
Operating Temperature:------------------------------------------------------------------------41°F to 104°F 
Accessories:------------------------------------------------------------------------------------- 1 coaxial cable (Part No. EW10251) 

---------------------------------------------------- 1 remote control unit (Part No. HL11131) for VT-UX6430A, 2 AA batteries 
---------------------------------------------------- 1 remote control unit (Part No. HL11132) for VT-UX6440A, 2 AA batteries 

* Check your cable company's compatibility requirements. 

For information about how to obtain these and other HITACHI accessories, please call HiTRON, Inc. TOLL FREE 
at 1-800-995-4500 (in the continental United States). For ALASKA and HAWAII, please contact the nearest 
Hitachi Regional Office. 

Design and specifications subject to change without notice. 

Hitachi Service Hotline 

Authorized Hitachi service facilities are available throughout the US and Canada. For the location nearest to you, 
call the Hitachi Service Hotline at one of these numbers: 

In the continental U.S.A 

DIAL TOLL FREE 

7 days a week, 24 hours a day 

1-800-HITACHI 

(1-800-448-2244) 

You must state your zip code when calling 

In Canada 

MONTREAL                   514-956-9882 

Summary of Contents for VT-UX6430A














































































Reviews: