Hitachi VSP F400, System Administration Manual

Page: 268 / 414

Note: To reinstall a license key after uninstalling it, contact Hitachi
Data Systems customer support to reissue the license key file.
Related tasks
• Removing a Data Retention Utility license on page 268
Removing a Data Retention Utility license
Caution: When you remove a Data Retention Utility license, an error might
occur, even if the Permitted Volumes column of the License Keys window
indicates that the licensed capacity is 0 TB.
Procedure
1. Click Actions > Other Function > Data Retention to open the Data
Retention window.
2. In the Data Retention window, find logical volumes that are unusable
as S-VOLs.
3. Change the settings so that the logical volumes are usable as S-VOLs.
4. Uninstall the Data Retention Utility.
Examples of license information
The following table provides examples of license information displayed in the
License Keys table of the maintenance utility.
License key status
(example)
Status Key type Licensed capacity Term (Days)
Not installed Not installed blank Blank Blank
Installed with the
permanent key Installed permanent Permitted -
Installed with the term key
and set to Enabled Installed term Permitted Number of
remaining days
before expiration
Installed with the term key
and set to Disabled Installed (Disabled) term Permitted -
Installed with the
temporary key. Installed temporary - Number of
remaining days
before expiration
Installed with the
emergency key. Installed emergency - Number of
remaining days
before expiration
A temporary key was
installed, but has expired. Expired temporary - Number of
remaining days
before expiration
268 Managing license keys
System Administrator Guide for VSP Gx00 models and VSP Fx00 models