MIB
Supported?
tcp group
No
udp group
No
egp group
No
snmp group
No
Extension MIB
Yes
SNMP Agent MIB access mode
The access mode for MIB in all communities is read only. If you send a GET request for a
SET REQUEST operation, you will receive
NoSuchName
as a RESPONSE.
Example object identifier system
The following figure shows an example object system supported by SNMP Agent.
Execute
snmpwalk
as follows to obtain all MIB objects:
1. Specify object identifier 1.3.6.1.2.1 to obtain the information shown in 1.
2. Specify object identifier 1.3.6.1.4.1.116 to obtain the information shown in 2.
MIB mounting specifications supported by SNMP Agent
SNMP Agent supports two MIB mounting specifications.
The supported MIB mounting specifications are as follows:
■
mgmt OBJECT IDENTIFIER ::= {iso(1) org(3) dod(6) internet(1) 2 }
■
mib-2 OBJECT IDENTIFIER ::= {mgmt 1}
SNMP Agent MIB access mode
Chapter 7: SNMP supported MIBs
Hitachi Alert Notification Guide for VSP5000 Series
45