DATE/TIME Setting
pg.
20
32
you go past the date you want to set, press
"REW"
button. When the correct date
appears, press
"STOP/EJECT"
button.
5.
Press
"F.FWD"
or
"REW"
button to select year, and then press
"STOP/EJECT"
button.
6.
Press
"F.FWD"
or
"REW"
button as many times as may be required to select the
correct hour, and then press
"STOP/EJECT"
button.
7.
Repeat step 6 to select minute and AM/PM.
8.
After setting AM or PM, press
"DATE/TIME"
button to change the display and start
the internal clock. It is recommended that you press
"DATE/TIME"
button to match the
time signal.
9.
Press
"DATE/TIME"
button after setting the clock. The display will change as follows
each time the button is pressed.
NOTE:
The date/time graphics will be recorded whenever they appear in the viewfinder.
To correct date/time information after starting the date/time
1.
Press and hold
"DATE/TIME"
button, and then press
"STOP/EJECT"
button. The
month starts flashing.
2.
Correct the incorrect digit by using
"F.FWD", "REW"
and
"STOP"
buttons.
To correct date/time information during programming
Press
"STOP/EJECT"
button repeatedly until the digit that is incorrect flashes. Correct
the incorrect digit by using
"F.FWD", "REW"
and
"STOP/EJECT"
buttons.
Summary of Contents for VM-3700A - Camcorder
Page 15: ...ELECTRONIC VIEWFINDER 15 ...
Page 36: ...AUTO FOCUS 36 6 Objects moving rapidly 7 Dark objects ...
Page 54: ...RECORDING TV PROGRAMS 54 ...
Page 56: ...AUDIO DUBBING 56 ...
