TITLE RECORDING
46
Correcting errors during title storage
1.
Press
"Shift"
button repeatedly until the character to be corrected will flash.
2.
Press either "-" or "+" button until the correct character appears.
NOTE:
The correct character may flash, however it will be recorded correctly without
flashing.
Recording titles on a tape in the camera/recorder
1.
Slide
"POWER"
switch to
"VIDEO"
.
2.
Locate the position on the tape that you wish to record the title.
3.
Set
"POWER"
switch to
"CAM"
.
4.
Press
"TITLE"
button to display the title graphics.
5.
Press
"PAGE"
button until the title you wish to record appears in the viewfinder.
6.
Press
"REC/PAUSE"
button to start the title recording.
7.
Press
"TITLE"
button to remove the title graphics from the viewfinder. The
camera/recorder will now record as normal.
NOTE:
If you are planning to video tape an event you must prepare your titles in advance,
then by pressing
"TITLE"
button superimpose the title over the scene as it's being
recorded. You cannot go back and record titles over existing video without erasing the
previously recorded material.
