5 - 1
Disassembly and Reassembly
5
Fig. 5-1-1
Fig. 5-2-1
5-1 Order of Disassembly
Refer to “Disassembly Flowchart” in Fig. 5-1-1 for the order of
removing components. When reassembling components, use the
reverse order to removal unless otherwise specified.
Note:
When replacing components in the VK-U174/U174E, be sure to
use only those shown in "Replacement Parts List".
Reading Disassembly Flowchart:
After locating the target component in the flowchart, remove all
components of the target in sequence, following the arrows
(routes) from the top of flowchart.
5-2 Disassembly
Information:
Numbers in figures are step numbers in disassemble procedure,
and letters in brackets [ ] show the types of screw.
L and R Brackets (Fig. 5-2-1)
1) Remove three screws [A].
2) Release two tabs and remove the L bracket.
3) Remove three screws [A] and remove the R bracket.
Component name
L Bracket
R Bracket
CSR Circuit Board
Item
No.
1) to 3)
Camera Frame
PC Circuit Board
4) to 7)
Circuit Board Frame
8) and 9)
10) and 11)
Lens Frame S
Lens Frame
12) and 13)
SP Circuit Board
Sensor Unit
14)
Image Sensor
Lens
15)
R BRACKET
3) SCREWS [A]
1) SCREWS [A]
2) TABS
1) SCREW [A]
L BRACKET
CAMERA CHASSIS
[A] M1.7×3 (Black)
