High Speed Dome Camera User’s Manual
- 21 -
8.5 Timer Setup
This function sets the time for executing presets, scan, tour and auto learning.
1. Press ‘MENU’ on the keyboard or evoke the presets no. 95 and 64 to enter the main menu,
or press the preset no.1 twice continuously within 1 second.
2. Move the joystick and make the cursor to [USER PROGRAM], and enter the sub-menu.
3. Move the cursor to [timer Setup] and enter the menu as shown in the left:
[NO.]: 8Channels in total
[START TIME]: The start time to execute relevant channel
[END TIME]: The end time to execute relevant channel
[TRIGGER TYPE]: Choose the execution functions of pointed channels; each channel can
set Closing preset/Scan/Tour/Auto learning (1-4).
[TRIGGER ACTION]: Execute relevant channel
[TIMING ACTIVE]: Activate the timing device
[EVERYDAY]: Executing the timing switch everyday
4. If the function is closed, the time period of this channel won’t conflict with other channels
Notice:
1. During the scan, touring or auto learning, once the presetting time is over, the
current action will be stopped, and the camera will resume to previous status and
position before presetting time.
2. Idle running function s not allowed during the timing period;
3. The timing functions will not be executed while setting presets, recording auto
learning, setting start/end positions and menu status, etc.
TIMER SETUP
1. NO. 001
2. TRIGGER TYPE PRESET
3. TRIGGER ACTION 001
4. START TIME 00:00
5. END TIME 00:00
6. TIMING ACTIVE OFF
7. EVERYDAY
ON
8. RETURN
USER PROGRAM
1. PRESET SETUP
2. TOUR SETUP
3. AUTO LEARNING
4. SCAN SETUP
5. TIMER SETUP
6. ALARM SETUP
7. RETURN
MAIN MENU
1. DISPLAY SETTINGS
2. CAMERA SETTINGS
3. PRIVACY MASK
4. USER PROGRAM
5. SYSTEM SETTINGS
6. LANGUAGE/
7. EXIT
