Hitachi VisionCube, Service Manual

Page: 5 / 6

SXGA+ High Resolution LCOS Projector (ES50-116CM / ES70-116CM)
Contents - iv
8.1.10. External Signal Brightness And Color Adjustment
(External Signal Level Setting)
……………… 8-22
8.1.11. Display Condition Check, Other Settings ……………… 8-25
8.1.12. Auto-Scan Settings ……………… 8-29
8.1.13. Changing RGB Input Terminals And Copying Between
Mode Numbers
……………… 8-32
8.2. Projector Adjustment Data Record Sheet ……………… 8-34
8.3. Setup Data List ……………… 8-38
9
Projector System Setup and Control
9.1. Projector Control ……………… 9-2
9.1.1. Control Single Projector Using RS232C Communication ……………… 9-2
9.1.2. Control Multiple Projectors Using RS485 Communication ……………… 9-4
9.1.3. Control Multiple Projectors Using RS232C
Communication
……………… 9-7
9.2.Communication Specifications ……………… 9-9
9.2.1. RS232C ……………… 9-9
9.2.2. RS485 ……………… 9-9
9.3.Communication Procedure ……………… 9-10
9.3.1. Overview ……………… 9-10
9.3.2. Format ……………… 9-10
9.4.Communication Commands ……………… 9-13
Part 3
Technical Data
10
Specifications
10.1. Characteristics And External Appearance ……………… 10-2
10.1.1. Characteristics ……………… 10-2
10.1.2. External Appearance ……………… 10-3
10.1.3. High-Speed Lamp Changer ……………… 10-5
10.2. Ancillary Site Requirements For Installation ……………… 10-6
10.3. Maintenance Area Specification ……………… 10-7
10.3.1. ES50-116CM ……………… 10-7
10.3.2. ES70-116CM ……………… 10-8
10.4. Connection Specification ……………… 10-9
10.5. Accessories ……………… 10-10
10.6. Packaging ……………… 10-12
10.6.1. ES50-116CM ……………… 10-12
10.6.2. ES70-116CM ……………… 10-12