Hitachi Virtual Storage Platform G400 Reference Manual Download

Page: 8 / 124

Safety and environmental notices

Equipment warranty

The term of guarantee of normal operation of the storage system and free service is one year from

date of purchase.

If a failure occurs multiple times, the storage system might shut off to avoid a serious accident.

Notice of export controls

Export of technical data contained in this document might require an export license from the United

States government, the government of Japan. or both. Contact the Hitachi Legal Department for

guidance about any export compliance questions.

Backup

Hitachi cannot guarantee against data loss due to failures. Therefore, back up your data to minimize

chances for data loss.

Data backup is also critical when hardware components are added or replaced, because performing

such hardware procedures restores parameter settings that can affect how data is managed on the

storage systems.

Disposal

This symbol on the product or on its packaging means that your electrical and electronic equipment

should be disposed at the end of life separately from your household wastes.

There are separate collection systems for recycling in the European Union. For more information,

contact the local authority or the dealer where you purchased the product.

Recycling

A nickel-metal hydride battery is used in the Cache Backup Battery.

A nickel-metal hydride battery is a resource that can be recycled. When you want to replace the

Cache Backup Battery, call the service personnel. They will dispose of it for you. This nickel-metal

hydride battery, which is designated as recycling product by a recycling promotion low, must be

recycled.

The mark posted on the Cache Backup Battery is a three-arrow mark that indicates a recyclable part.

UEFI Development Kit 2010

This product includes UEFI Development Kit 2010 written by the UEFI Open Source Community. For

more information, see the UEFI Development Kit website:

http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=UDK2010

Preface

Hitachi Virtual Storage Platform G400, G600 Hardware Reference Guide

Summary of Contents for Virtual Storage Platform G400





























































































































Search results

Summary of Contents for Virtual Storage Platform G400

Reviews:

Related manuals for Virtual Storage Platform G400

Brands by name

Popular brands

Hitachi Virtual Storage Platform G400, Reference Manual

Search results

Summary of Contents for Virtual Storage Platform G400

Reviews:

Related manuals for Virtual Storage Platform G400

Brands by name

Popular brands