Hitachi Virtual Storage Platform G400 Reference Manual Download

Page: 87 / 124

Do not specify a user name by only using "." or ".." or begin a user name with "-" because

you will not be able to log in to the NAS platform.

Confirm the settings, and then click

Apply

When the completion message appears, click

Close

Disabling user accounts

The following procedure describes how to disable user accounts.

Observe the following guideline:
• Log into an account that is different from the user whose account that you

want to disable (you cannot disable the current login user account).

• To disable the user account specified by the registered storage system in

the

Storage Device List

window, click Stop Service for the registered

storage system. After disabling the user account, click Edit to enable the
user account.

Procedure

In the Maintenance Utility window, click

Administration > User

Administration

In the

User Groups

tab, click the user group to which the user belongs.

User administration for maintenance utility

Hitachi Virtual Storage Platform G400, G600 Hardware Reference Guide

Summary of Contents for Virtual Storage Platform G400





























































































































Search results

Summary of Contents for Virtual Storage Platform G400

Reviews:

Related manuals for Virtual Storage Platform G400

Brands by name

Popular brands

Hitachi Virtual Storage Platform G400, Reference Manual

Search results

Summary of Contents for Virtual Storage Platform G400

Reviews:

Related manuals for Virtual Storage Platform G400

Brands by name

Popular brands