Hitachi Virtual Storage Platform F400, System Administrator Manual, Page: 58 / 368

3. Press any key to acknowledge the message and close the message box.
4. Close the Windows command prompt.
Effects of changing SVP port numbers
Set the firewall settings of the management client according to new SVP port numbers.
The following table describes the effects for each port number.
Port number key name Effects
User reference guide on
changing the SVP port
number
MAPPWebServer
MAPPWebServerHttps Changes the method to
specify URL for Device
Manager - Storage
Navigator login
See Logging in to Device
Manager - Storage
Navigator (on page 37) .
In Hitachi Command Suite:
You must change the HCS
port number to be the
same number.
Hitachi Command Suite
Installation and
Configuration Guide
RMIClassLoader When you execute the
Export Tool command, you
must specify a port
number. The port number
should be the one you
have specified for the -
el.dlport operand of the
java
command, which was
used for downloading the
Export Tool.
Performance Guide
RMIIFRegist When you execute the
Export Tool command, you
must specify the IP address
and new port number of
the SVP for IP-sub-
command .
Performance Guide
(Performance Monitor,
Server Priority Manager)
In Hitachi Command Suite:
You must change the HCS
port number to the same
number.
Hitachi Command Suite
Installation and
Configuration Guide
PreRMIServer None None
DKCManPrivate None None
Effects of changing SVP port numbers
Chapter 3: Configuring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 58