Hitachi ULTRAVISION 48C6 Owner'S Manual Download Page 39

39

Congratulations on your purchase of a new Hitachi display product. 

LIMITED WARRANTY:   

Hitachi America Ltd., warrants this product in accordance with the terms and conditions applicable to the products identified below: 

Conditions of 

"

Hitachi

"

 Limited Warranty:  

This Hitachi display product (the 

Product

) is warranted to be free from defects in materials and 

workmanship beginning on the date of purchase by the original owner and continuing for the duration of the applicable time periods specified below. 
If the Product is found to be defective, Hitachi will repair or replace (at Hitachi

s option) defective parts at no charge, subject to the conditions of this 

Limited Warranty. If the original owner rejects, refuses or otherwise does not accept Hitachi

s offer to repair or replace such defective parts under 

this Limited Warranty, this Limited Warranty shall be void and of no further force or effect. This Limited Warranty extends to the original owner 
only and is not transferable, and such owner  must provide a dated sales receipt  for the Product to qualify  for parts or service under this Limited 
Warranty. 

T he original owner must notify Hitachi of a defect claim by calling 800-HITACHI 

during the applicable Limited Warranty period for 

this Limited Warranty to be effective. This Limited Warranty is valid only in the U.S.A., Canada and Puerto Rico. 

Hitachi Product: LCD Flat Panel Televisions 

PARTS

: The Limited Warranty period for parts is 1 year from the date of original purchase. During the 

Limited Warranty period for parts, Hitachi will replace defective parts with new or rebuilt parts (at Hitachi

s option) at no charge for such parts. Any 

replacement part will be warranted for the remainder of the original warranty period applicable to the part replaced. 

LABOR

: The Limited Warranty 

period for labor is 1 year from the date of original purchase. During the Limited Warranty period for labor, Hitachi will repair or replace (at Hitachi

option) defective parts without charge for labor. 

SERVICE LOCATION

: In-home warranty service, which includes either in-home repair or free 

pick-up and delivery (at 

Hitachi’s

 option), applies to all Hitachi products except: (i) 43-inch and smaller LCD Flat Panel Televisions; (ii) Products 

located outside the U.S.A., Canada or Puerto Rico; (iii) Products located more than seventy-five (75) driving miles from Hitachi

s nearest Authorized 

Service  Facility.  If  the  foregoing  clauses  (i),  (ii),  (iii)  apply,  then  the  Product  owner  will  be  responsible  for  bringing/delivering  the  Product  to  a 
Hitachi Authorized Service Facility and, following warranty service, retrieving the Product from such Authorized Service Facility. 

IMPORTANT: 

Before using or installing your Product, please complete this form and attach your sales receipt and retain them for your records. 

This will help facilitate proper warranty coverage. 

MODEL NO.  

SERIAL NO.  

DEALER NAME  

DATE OF PURCHASE 

DEALER ADDRESS 
CITY  

STATE / PROVINCE 

Wa rranty Limitations.  

THIS HITACHI LIMITED WARRANTY DOES NOT COVER:

  

A. Any Product that has been modified or repaired in a 

manner  not  previously  authorized  by  Hitachi  in  writing.  B.  Any  Product,  whose  serial  number  has  been  removed,  altered,  replaced,  defaced  or 
rendered illegible. C. Any defect, malfunction, or failure caused by or resulting from improper or unauthorized service, maintenance or repair. D. 
Damage  resulting  from  abuse,  misuse,  mishandling,  neglect  or  damage  caused  by  exposure  to  hostile  operating  environments  such  as  areas 
containing dust and/ or smoke. E. Damage caused by power surges, accidents, natural disasters or any other events or circumstances outside Hita

chi’

control. F. Any Product used in any manner inconsistent with the acceptable set-up, usage, safety or installation configurations identified in the 

Product’s

 Operating Guide. G. Any Product used for purposes or applications, or subjected to operating conditions, other than those identified as 

acceptable  in  the 

Product’s

  Operating  Guide.  H.  Product  repairs  (including  any  product  whose  case  has  been  opened),  or  part  replacements 

provided or installed, by any person other than an Authorized Hitachi Service Facility Representative. I. Improper uncrating, set-up or installation 
or any misadjustments caused by user-operated controls. J. Any labor or costs associated with removing the Product from a custom cabinet or other 
specialized product installation that impedes direct and immediate removal of the Product from the 

owner’s

 premises (must be arranged and paid 

by the owner). K. Product cabinets, cabinet parts, knobs, batteries

accessories

, or any third party's branded hardware or peripheral devices, including 

any software incorporated therein, whether or not included within the Product's original packaging

. L. Product screens that have been cleaned by any 

method  other  than  as  specified  in  the 

Product’s

  Operating  Guide.  M.  Normal  usage,  degraded  brightness  caused  by  backlight  aging  and/or  cell 

defects or ordinary wear and tear, including, without limitation, scratches or marks on the Produc

t’

s screen, cabinet or the appearance of bright or dark 

screen pixels. N. Any Product returned for service that is damaged due to improper packaging, mishandling or shipping. (IMPORTANT: When 
shipping  any  Product  to  a  Hitachi  Authorized  Service  Facility,  Product  owner  must  package  it  securely  in  the  original  shipping  container  or  its 
equivalent to prevent damage. The Product must be returned with the shipping charges prepaid and proof of purchases included in the shipping 
container. Failure to properly package such product during such shipment will void all warranties.) O. Any Product purchased or serviced outside 
the U.S.A., Canada and Puerto Rico. P. Any Product that has been used for commercial purposes.  

NO PERSON, AGENT, DISTRIBUTOR, DEALER, SERVICE FACILITY, OR COMPANY IS AUTHORIZED TO CHANGE, MODIFY OR AMEND THE TERMS 
OF  THIS  LIMITED  WARRANTY  IN  ANY  MANNER  WHATSOEVER.  EXCEPT  AS  PROVIDED  IN  THIS  LIMITED  WARRANTY,  HITACHI  MAKES  NO 
EXPRESS  WARRANTY  REGARDING  THIS  HITACHI  PRODUCT.  FURTHER,  ALL  IMPLIED  WARRANTIES  RELATING  TO  ANY  PORTION  OF  THIS 
PRODUCT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION 
SPECIFIED  UNDER  THIS  LIMITED  WARRANTY.  HITACHI  SHALL  NOT  BE  LIABLE  TO  THE  PURCHASER  OR  TO  ANY  OTHER  PERSON  FOR  ANY 
INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES  OR  LOSS  OF  PROFIT  OR  PRODUCT  RESULTING  FROM  ANY  DEFECT  IN,  OR  MALFUNCTION  OR 
FAILURE OF, THIS HITACHI PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY 
LASTS,  OR  THE  EXCLUSION  OF  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES,  THE  ABOVE  LIMITATIONS  MAY  NOT  APPLY  TO  YOU.  THIS 
LIMITED  WARRANTY  CONFERS  SPECIFIC  LEGAL  RIGHTS,  INCLUDING  CERTAIN  OTHER  RIGHTS  THAT  MAY  VARY  DEPENDING  ON  YOUR 
JURISDICTION.    THIS  LIMITED  WARRANTY  SHALL  BE  GOVERNED  BY  AND  CONSTRUED  IN  ACCORDANCE  WITH  THE  LAWS  OF  THE 
JURISDICATION OF THE PRODUCT OWNER

S RESIDENCE. 

Summary of Contents for ULTRAVISION 48C6









































Reviews: