background image

Hitachi Global Storage Technologies 

 

Page 5 

 

 

 

 

 

 

 

 

 

 

version 1.0 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

© Copyright Hitachi Global Storage Technologies  

Hitachi Global Storage Technologies 
5600 Cottle Road 
San Jose, CA 95193 

Produced in the United States 

01/07 

All rights reserved

 

Travelstar

TM

 is a trademark of 

Hitachi Global Storage Technologies.  

Microsoft, Windows XP, and Windows are 
trademarks of Microsoft Corporation in the United 
States, other countries, or both. 

Other product names are trademarks or registered 
trademarks of their respective companies.  

References in this publication to Hitachi Global 
Storage Technologies products, programs or services 
do not imply that Hitachi Global Storage 
Technologies intends to make these available in all 
countries in which Hitachi Global Storage 
Technologies operates. 

Product information is provided for information 
purposes only and does not constitute a warranty.  

Information is true as of the date of publication and is 
subject to change. Actual results may vary.  

This publication is for general guidance only. 
Photographs may show design models. 

03 January 2007 

 

Summary of Contents for Ultrastar C10K147






Reviews: