3
Item Description
6
System buttons and LEDs.
1. Power
2. Reset
3. Power
4. Hard disk activity
5. LAN1 (ETH1) on the right and LAN2 (ETH0) on the left
6. Overheat or fan failure
Flashes for fan or temp problems, and also flashes for power supply problems
such as AC cable unplugged.
Figure 2: SMU400 Rear View
Item Description
1
PSU 1.
2
PSU 2.
3
IPMI Ethernet port (optional).
Warning
: IPMI functionality is provided
as-is
. The IPMI functionality for the SMU400 is
not provided by HDS, and the use of IPMI with the SMU400 is not supported by the HDS
Technical Resource Centre.
Use at your own risk.
4
Keyboard and mouse PS/2 ports (keyboard and mouse may be connected through USB
ports).
5
USB ports.
6
COM1 (serial connector A). This port is preferred for serial communications, since it works
at boot time and after boot time. Note that COM2 (serial connector B) is on the front panel